武漢格萊莫檢測設備有限公司  

電話：13545068882；027-86619889

傳真：027-86619889  

網址：www.glmgs.com  www.gelaimo.com

http://www.glmgs.com/prodxx.asp?id=814

一、產品簡介
　　本儀器是測定瓦楞紙板粘合強度(PAT試驗) 時的試驗器具。試驗架由下插針架(各楞型通用)、上插針架(A、B、C楞各1件)和上下插針組成，具有操作方便，無需調節，適用性強等特點，可廣泛適用于瓦楞紙板(箱)生產、科研和產品質量監督檢驗等部門進行瓦楞紙板單剝離試驗。本儀器參數、功能符合下列國家標準：GB/T 2679.8-1995《紙和紙板環壓強度的測定》；GB/T 6546-1998《瓦楞紙板邊壓強度的測定》；GB/T 6548-1998《瓦楞紙板粘合強度的測定》；GB/T 2679.6-1996《瓦楞原紙平壓強度的測定》
二、技術指標
    ★插針直徑：φ3mm　(A楞型)、φ2mm　(B、C楞型)。
    ★插針軸線對底面平行度誤差：                  
    ★裝試樣后大外形尺寸(長×寬×高，mm)：100×50×45。  　


一、產品簡介
One, product introduction
　　本儀器是測定瓦楞紙板粘合強度(PAT試驗) 時的試驗器具。試驗架由下插針架(各楞型通用)、上插針架(A、B、C楞各1件)和上下插針組成，具有操作方便，無需調節，適用性強等特點，可廣泛適用于瓦楞紙板(箱)生產、科研和產品質量監督檢驗等部門進行瓦楞紙板單剝離試驗。本儀器參數、功能符合下列國家標準：GB/T 2679.8-1995《紙和紙板環壓強度的測定》；GB/T 6546-1998《瓦楞紙板邊壓強度的測定》；GB/T 6548-1998《瓦楞紙板粘合強度的測定》；GB/T 2679.6-1996《瓦楞原紙平壓強度的測定》
This instrument is the determination of adhesive strength of corrugated cardboard ( PAT test) must have special test apparatus. Test rack by a pin frame ( under each arris needle holder ( general ), A, B, C corrugated 1 pieces ) and the upper and lower pin component, has the advantages of convenient operation, without the need for regulation, wide adaptability, and can be widely applied to corrugated cardboard ( box ) production, scientific research and product quality supervision and inspection department of corrugated cardboard sheet peeling test. The instrumental parameters, functions in accordance with the following national standards: GB/T 2679.8-1995 " paper and board - Determination of ring crush strength "; " GB/T 6546-1998 corrugated fibreboard - Determination of edgewise crush resistance "; " GB/T 6548-1998 corrugated paper board for the determination of bond strength of " GB/T 2679.6-1996 "; Corrugating medium determination of flat crush resistance "
二、技術指標
Two, technical indicators
★插針直徑：φ3mm　(A楞型)、φ2mm　(B、C楞型)。
★pin diameter:φ 3mm ( A type ),φ 2mm ( B, C type ).
★插針軸線對底面平行度誤差：                  
Pin on the bottom surface of the axis parallelism error:
★裝試樣后大外形尺寸(長×寬×高，mm)：100×50×45。
★mounted specimen maximum dimension ( length * width * height, mm ) :100 × 50× 45.